HFSS11 beta 仿真出錯
文章來源: 互聯網 錄入: mweda.com
HFSS11 beta 仿真出錯,迭代完成后不能繼續掃頻分析。
提示如下:
6A dipole_1 (F:/Ant design/HFSS11 Beta/)
HFSSDesign1 (DrivenModal)
[error] Communication failure. System error no: 109, error description:Unknown error (11:39 下午 八月 17, 2007)
[error] Communication failure. System error no: 0, error description:No error (11:39 下午 八月 17, 2007)
[error] Adaptive solution setup, process hf3d exited with code 259. (11:39 下午 八月 17, 2007)
[error] Simulation completed with execution error on server: Local Machine. (11:39 下午 八月 17, 2007)
微波EDA (kaiqijixie.cn) 網友回復:
-
網友回復
我單位的機子都裝不上,不知道怎么回事,也許和破解有關系吧,要不就是機子的問題,不支持 -
網友回復
我用beta好像問題好大阿,可能是破解問題吧,也有可能是beta本身的錯誤吧 -
網友回復
是啊,但我同事的老機子是裝上的拉,可能是我機子的問題吧 -
網友回復
都出11了,我10還剛用上呢,不過10比9的確有所改進,不知道11改進了什么 -
網友回復
Version 11.0 Major Enhancements
===============================
Solving:
- Higher-order basis functions incorporated for improved accuracy and solution efficiency
- Improved port-solver to handle lower frequencies, and decrease noise floor
- Analytic ports for rectangular, circular, and coaxial port geometries to improve modal
consistency and port accuracy
- Iterative solver option reduces RAM requirements for large solutions and makes use of
multiple processors to handle more than one excitation
Meshing:
- Higher-quality tetrahedra with lower aspect-ratio to promote faster convergence
Floquet Ports:
- Produce higher accuracy at large scan angles
- Provide additional information that is particularly useful for periodic structures, such
as phased-array antennas and frequency-selective surfaces: separation of fields into
modes, phase information available for each mode
Screening Impedance Boundary:
- Available to replace geometrically complex periodic screens or grids
- Isotropic or anisotropic impedance can be specified directly or through a link to another
unit-cell design
Incident Fields:
- Total-field formulation now uses E- and H-field information from the incident wave
- Incident field from small current loop is now available
Design Link:
- SIWave-HFSS and HFSS-HFSS links based on E- and H-fields
- Additional option to update source field pattern at each adaptive pass
Distributed Solve Option:
- Automatic distribution of individual discrete and interpolating sweep frequencies to different
nodes
- Distributed solve available for all Optimetrics' setups, including Optimization, Sensitivity,
and Statistical Analysis
Optimetrics:
- Addition of Genetic Algorithm
- Latin Hypercube Sampling now included in statistical analysis setup
Desktop:
- Toolbar customization
Modeler:
- Upgrade to ACIS R16 SP6
- Auto-assignment of terminals at port setup eliminates need for terminal lines
- New commands: Region, Thicken Sheet, Sweep Face Along Normal
- Enhanced manual-healing GUI and more advanced auto-healing procedure during geometry import
- CATIA v4 and v5 geometry import now available
- GDSII export now available
Post-Processing:
- Fully scriptable new report editor and 2D plot GUI
- Copy and paste of data from one report to another
- Generation of report templates
- Ranged functions to extract calculations such as maximum, minimum and average from a plot
or dataset
- Mesh statistics available in the solution data panel
- Antenna parameters: front-to-back ratio as part of antenna parameters; 3-dB beamwidth and
sidelobe levels included as part of the ranged functions -
網友回復
另外有一點,我想說的是:
不要動不動就把問題規到Crack上。其實,要校驗Crack是否有問題,很簡單,真正又有多少人做過?
現在的軟件、資料都來得太容易,人們很容易浮躁,我們需要做的是Design,而不是拿個軟件隨便跑跑。要用好這些軟件,首先得有基本功。 -
網友回復
大家要把HFSS-VCRedist-vcredist_x86.exe先運行一下,這樣才能裝的上
還有就是無論路徑還是文件名還有里面的名稱也不要出現中文,
我的機器裝上就挺好用的,我同事他們就有的用不起來 -
網友回復
1.我昨天裝了一下,當時我的也報錯了,發現是FLEXID裝不上,后來發現是和我的殺毒軟件有沖突,關閉殺毒軟件后(當然你首先要確定你的HFSS內不含毒,用殺毒軟件掃一下)重裝了一遍后通過。
2.然后,把HFSSFIX.COM拷貝到你的---:“某盤:\Ansoft\HFSS10” 文件下下,雙擊‘HFSSFIX.COM”。
3.把license.lic拷貝到你的---:“某盤:\Ansoft\admin”文件夾下即可! -
網友回復
網上公認v11的破解有問題,我現在用的時候發現計算結果有,但是在結果處理的時候老提示無結果,暈,頭大,算得快是很快. -
網友回復
我用HFss11 beta 好像還好嗎。只是有些小問題。 -
網友回復
我今天剛裝上,感覺不錯
就是暗裝之前先運行一下HFSS>>VCRedist-vcredist_x86.exe后再安裝就 沒問題了
不然就會報錯,說什么應用程序出錯
-
網友回復
我用9和10都不停的報錯說硬盤空間不夠
自從用了v11,跑麻麻順,從來不錯 -
網友回復
11占的內存和硬盤空間都小了...
速度有些提高..
申明:網友回復良莠不齊,僅供參考。如需專業解答,推薦學習李明洋老師的HFSS培訓視頻,或咨詢本站專家。
-
國內最全面的HFSS培訓課程,包含7套視頻教程和2本教材,資深專家講解,視頻操作演示,結合最新工程案例,讓HFSS學習不再難...【詳細介紹】
- Ansoft HFSS 3D Post Proces…
求初級的視頻
HFSS仿有載Q值的建模問題
怎樣用matlab 調用 HFSS 接…
關于DGS在HFSS中仿真的問題
怎樣在HFSS中看兩個天線的Gr…
hfss11-求解激勵的問題
請教一下 在HFSS里面如何計算…
如何將HFSS的仿真結果導入mi…
HFSS11和CST2008是否支持四核…
- · HFSS視頻培訓課程
- · HFSS電磁仿真設計應用詳解-在線閱讀
- · HFSS教程
- · HFSS百科問答