您現在的位置:  
 首 頁 > HFSS > HFSS問答百科 > HFSS仿真過程中停在那里不動是什么原因?

HFSS仿真過程中停在那里不動是什么原因?

文章來源: 互聯網    錄入: mweda.com   

我在HFSS仿真過程中出現了以下這個問題:信息欄也沒有出現有錯誤的信息,但是仿真就是停在那里不動,不知道是什么原因,有知道的大俠沒有解釋一下!注意進程欄下面的“Surface recovery”是什么意思?


未命名.jpg


微波EDA (kaiqijixie.cn) 網友回復:

  • 網友回復


    是不是因?yàn)榫W(wǎng)格劃分太多了?以前也遇到過類似的問題
  • 網友回復


    大俠能不能詳細的解釋一下呢。我的網格劃分應該是默認的,應該怎么改呢?
  • 網友回復


    是不是你所在盤的虛擬內存不夠?
  • 網友回復

    我出現過這個問題。如果你網格是默認的話,那就修改下你的掃頻的頻段。把頻率設置到低頻段,范圍改小一點,先算個結果出來,證明你這個模型沒有問題。
    然后,低頻的可以出來,高頻的就是你的機器配置可能有點低,到別人的機器上去算下,同時,有可能的話,自己再優化一下網格。
  • 網友回復

    antenna_03 (E:/ansoft-hfss/1/)
      HFSSDesign1
        [info] Translation Info: Log of translation is in E:/ansoft-hfss/1/antenna_xlation.log (3:06 と  きる 20, 2009)
        [error] Boundary Setup: An excitation must be defined in order to solve driven problems. (3:35 と  きる 20, 2009)
        [error] Solution Setup: No solution setups have been created. (3:35 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:47 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:47 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:50 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:50 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:52 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:52 と  きる 20, 2009)
        [error] Mesh generation has failed. Specific details may be found in 3D Modeler>Model Analysis>Show Analysis Dialog>Last Simulation Mesh. (3:55 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (3:55 と  きる 20, 2009)
        [warning] Boundary 'FiniteCond1': Assignment has changed due to geometry modifications. (4:05 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length1' to be rendered invalid. The mesh operation has been deleted as a result. (4:05 と  きる 20, 2009)
        [warning] Boundary 'FiniteCond1': Assignment has changed due to geometry modifications. (4:06 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length2' to be rendered invalid. The mesh operation has been deleted as a result. (4:06 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:07 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:07 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:08 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:08 と  きる 20, 2009)
        [error] Initial mesh, process mesh3d died unexpectedly. (4:09 と  きる 20, 2009)
        [error] Simulation completed with execution error on server: Local Machine. (4:09 と  きる 20, 2009)
        [warning] Geometry deletion/modification caused the mesh operation: 'Length2' to be rendered invalid. The mesh operation has been deleted as a result. (4:11 と  きる 20, 2009)
    這是我分析時出現的錯誤提示,請各位大哥指導一下。謝謝
  • 網友回復

    低頻的高頻的網格數有什么區別?我是新手 望指教
  • 網友回復

    好象 高頻的和有大電導率的都會分較多的網格 有高手能講一下嗎

申明:網友回復良莠不齊,僅供參考。如需專業解答,推薦學習李明洋老師的HFSS培訓視頻,或咨詢本站專家

  • 上一個教程:
  • 下一個教程: