HFSS視頻教程推薦： HFSS培訓教程套裝  |  兩周學會HFSS  |  HFSS微波器件仿真分析實例  |  HFSS雷達散射截面分析  HFSS天線設計  |  PCB天線設計和HFSS仿真分析實例  | HFSS-IE仿真器使用詳解和天線設計實例

 HFSS online help > Assign Excitation >
   Assign Master and Slave Boundaries       

Assign Floquet Ports

This section describes how to assign Floquet Ports on the unit cell after you define the Master and Slave boundaries. To assign the Floquet port perform the following steps.

1. Select the top face of the unit cell, right click, and select Assign>Excitation>Floquet Port from the shortcut menu.

2. Specify the A and B directions for the Lattice coordinate system. These define the periodicity of the planar lattice. The vector arrows must start and end at points on the face of the Floquet port and must have a common initial point.

3. The Modes Setup window displays a field for the Number of Modes, a button for access to the Modes Calculator, and a table.

4. On the post processing panel, if needed, the deembed distance can be specified.

		Ansys HFSS，Ansoft HFSS online help，Version 15.0.	HFSS視頻教程 | HFSS教程專欄 | 射頻工程師培訓培訓課程 : Assign Floquet Ports'>HFSSComments